Fast repairs, call(08) 8444 7311 Call

Help & advice

Hot water questions, answered

Straight answers from our licensed plumbers and gas fitters on choosing, running and repairing a hot water system. Still not sure? Ring (08) 8444 7311.

Emergency hot water repairs

No hot water, leaks and getting someone out today.

Can you come out today?

Yes, depending on availability. We can most likely get to you the same day if you call before 9am. Ring (08) 8444 7311 and we will tell you when we can be there.

Do you offer same day hot water repairs?

Yes, depending on availability. Same day is most likely if you call us before 9am.

How quickly can you get someone here?

Generally the same day.

Do you offer after-hours or weekend emergency service?

No. We work Monday to Friday only. If you call before 9am on a weekday, we can most likely get to you that day.

My hot water has stopped working. Can you fix it?

Yes, as long as the parts are readily available.

My hot water system is leaking. What should I do?

Turn off the water, gas and electricity to the system, then call us on (08) 8444 7311.

Is it safe to leave a leaking hot water system running?

No. We suggest isolating it (turning off the water, gas and power to the unit) to prevent damage to your house.

Can I turn off the water to the hot water system without turning off the whole house?

Yes. There should be an isolation valve installed close to your hot water system.

Can you repair my hot water system, or will I need a new one?

In most cases we can repair it. Sometimes the repair cost is close to the price of a new system, and then it makes more sense to replace it and get the benefit of the new system's warranty. We tell you which way we would go before any work starts.

Do you repair all brands of hot water systems?

We repair most brands, provided the parts and technical data are available.

Do you repair gas, electric, solar and heat pump systems?

Yes, all four.

Can you repair my hot water system on the first visit?

Yes, provided we have the parts in the van. We carry a wide range of spare parts in our vehicles.

Can you tell me what is wrong over the phone?

In most cases we can, with enough information. However, it is best to have one of our experienced technicians test the system to find the exact fault.

I have no hot water. What should I check first?

For electric, check the hot water circuit in the switchboard. For gas, check the gas is on and the pilot or unit is lit, and that the unit has power if it needs it. If it still will not heat, call us on (08) 8444 7311. See our trouble shooting page too.

Why is my hot water rusty or smelly?

Rusty or brown hot water can mean the tank is corroding inside, especially once the anode has worn away. A rotten egg smell is often a reaction with the anode. Both are worth getting checked before the tank starts to leak.

Why is my hot water system making noises?

Rumbling or popping usually means sediment has built up in the bottom of the tank. Ticking as pipes heat up is normal. Banging when taps turn off (water hammer) or loud hissing should be checked, so give us a call.

Can I fix my hot water system myself?

You can do the simple checks (switchboard, gas on, pilot lit), but in South Australia the repair itself must be done by a licensed plumber, and any gas work by a licensed gas fitter. It is safer, and it keeps your warranty and insurance in order.

What details help when I call about a repair?

The brand and model (on the sticker plate), roughly how old it is, whether it is gas, electric, heat pump or solar, and what is happening. A photo of the unit and its sticker plate helps us bring the right parts. You can send photos with the form on this page.

Costs and service fee

How our service fee works, quotes and paying.

How much does it cost to have someone come out?

We charge a service fee that covers the call-out and the first half hour of labour. Our rates are reviewed from time to time, so call us on (08) 8444 7311 for the current fee.

Do you charge a call-out fee?

The call-out is included in our half-hour service fee, not charged on top.

What is included in your service fee?

Half an hour of labour, with the call-out included.

Is there a fee even if you can't repair the system?

Yes. However, if you decide to go ahead with a new system, we take the service fee off the price of your new system.

If I decide to replace the system, do I still pay the service fee?

No. The service fee comes off the price of your new system.

Can you give me a price over the phone?

Yes, in most cases. Tell us the brand, model and what is happening, and we can usually give you an indicative price on the call.

Will the plumber tell me the cost before going ahead?

Yes. You know the cost before any work starts.

Is it worth repairing an older hot water system?

Yes, if your budget doesn't allow for a replacement, a repair is the cheaper option.

Do you offer pensioner discounts?

Yes.

Do you offer payment plans?

No.

Do your prices include GST?

Yes.

Why don't you show prices on the website?

Our prices change when our rates and suppliers' prices change, which happens once or twice a year. Rather than show figures that may be out of date, we give you a current indicative price by phone. Call (08) 8444 7311 or send us an online enquiry with a few photos.

Replacement and installation

Same day swaps, changing type and what happens on the day.

How much does a new hot water system cost, including installation?

It depends on the type, brand and size of the system and on the installation. We offer a wide range of gas, electric, solar and heat pump systems to suit different households and budgets. A straightforward replacement costs less than one that needs extra plumbing, electrical or installation work.

We can generally give you an indicative price over the phone once we know your existing system's details. For a more accurate quote we may ask for photos of your current installation. Our aim is competitive, transparent pricing with quality products, professional installation and reliable after-sales support.

Can you replace my hot water system today?

Yes, in most cases, depending on the time you call and how many technicians are available that day.

How soon can you install it after I accept your quote?

Generally the same day.

Can you give me a fixed price over the phone?

No. We can usually give you an indicative price by phone, but the final price is confirmed after an on-site inspection.

Do you need to inspect the property before quoting?

Yes, to give you a final, accurate price.

Can I send you photos of my existing hot water system?

Yes. Photos of the unit, its sticker plate and the area around it help a lot. You can attach them to the form on this page.

Are installation and plumbing materials included in your price?

Yes, everything is included, and our quote makes it clear if anything is excluded.

Will the new system fit in the same location?

Our technician measures the location to make sure it will fit.

Will I need new pipes or electrical work?

Sometimes. We make the alterations needed so all the pipework and electrical connect correctly.

Can you supply the same brand and model I already have?

Yes, in most cases.

Do I have to replace it with the same type of hot water system?

No. We can generally offer several options, for example electric to heat pump or gas storage to continuous flow. South Australian rules decide which types can go in your home, so we check that before we quote.

What is the cheapest replacement option?

A like-for-like replacement, or a smaller capacity system.

Can you replace a roof-mounted solar hot water system?

Yes.

Do you replace hot water systems in apartments and units?

Yes.

Will a new hot water system need a tempering valve?

In South Australia, a temperature control device such as a tempering valve is required when a water heater is installed, replaced, changed to a different type or relocated. It keeps the water at bathroom taps to no more than 50°C. It is not needed when only a valve, element or thermostat is replaced. We include it in the job where it is required.

Choosing a hot water system

Types, running costs, reliability and lifespan.

How do I choose a hot water system?

Start with what you already have connected (gas, off-peak power, solar panels), how many people live in the house and where the unit can go. Then weigh up running costs against the upfront price. Call Adelaide Hot Water on (08) 8444 7311 and we will talk you through the best hot water system for your specific application.

What are the main types of hot water system?

There are five main types: electric storage (a tank with an element), gas storage (a tank with a burner), gas or electric continuous flow (heats water only when a tap is on), heat pump (uses heat from the air) and solar (panels or tubes on the roof with a gas or electric booster). We supply, install and repair all of them.

Which hot water system do you recommend?

We recommend the trusted brands featured on our website, chosen for their proven reliability, quality and after-sales support. We prefer manufacturers with an established Australian presence, local service representatives and reliable warranty support, and we generally avoid brands without adequate local backup, because that can make repairs, spare parts and warranty claims difficult. Our priority is a dependable hot water system, backed by a manufacturer that can support it if it is ever needed.

What is the most reliable hot water system?

Gas continuous flow or conventional electric.

Which hot water system is cheapest to run?

It depends on your home, but as a guide: a heat pump uses far less electricity than a conventional electric tank, and costs even less to run if you have rooftop solar panels. 5 Star Gas hot water systems are about the same running cost as a conventional electric off peak system. A conventional electric tank on a continuous (all day) tariff is usually the most expensive to run.

What is the cheapest way to get hot water at home?

Call Adelaide Hot Water for a range of budget hot water systems and cost effective solutions for your home in Adelaide. The cheapest system to buy is not always the cheapest to own, so we compare the purchase price with what each option costs to run.

How long should my hot water system last?

Most gas, electric storage and heat pump systems last around 10 to 15 years, and some last considerably longer, depending on the brand, water quality, usage and maintenance. Solar systems approaching 15 to 20 years old can be hard to get parts for. If your system is nearing 15 years and breaking down often, replacing it may be more economical than ongoing repairs.

What are the signs my hot water system needs replacing?

Water pooling under the tank, rust-coloured hot water, a tank that runs out much sooner than it used to, signs of corrosion, or a system that keeps needing repairs. A leaking tank (not a valve) usually cannot be repaired and needs replacing.

How often should a hot water system be serviced?

Follow the manufacturer's servicing schedule for your model; for heat pumps that is generally a routine inspection every 1 to 2 years. Storage tanks with a sacrificial anode should have it inspected about every 3 to 5 years, and replacing it before it is gone can add years to the tank.

Heat pump hot water

Running costs, brands, winter, noise, sizing and solar.

What is a heat pump hot water system?

A more energy-efficient type of electric hot water system, with savings of up to 80% compared with a conventional electric system.

How does a heat pump work?

A heat pump takes heat from the surrounding air and transfers it into the water stored in the tank, much like a refrigerator working in reverse. Rather than making heat directly, it moves existing heat, so it is much more energy-efficient than a conventional electric hot water system and helps cut electricity costs.

Are heat pumps cheaper to run than gas?

Yes, in most cases. Heat pumps are highly energy-efficient and generally cost less to run than traditional gas hot water systems. Running costs depend on your electricity and gas tariffs, how much hot water your household uses and the system installed. Savings can be even greater if you have rooftop solar panels and run the heat pump during daylight hours.

How much does a heat pump cost, fully installed?

It depends on the brand, model and installation. We offer three ranges to suit different budgets: budget, mid-range and premium systems. Prices include GST and depend on site conditions and any rebates that apply; extra electrical or plumbing work can change the final price. Call (08) 8444 7311 for a current indicative price.

Are there government rebates for heat pumps?

Yes. The Federal Government still offers small-scale technology certificate (STC) incentives for eligible heat pump hot water systems, which reduce the purchase and installation cost. The South Australian REPS incentive, offered through third-party providers on behalf of energy retailers, has used up its 2026 allocation and is due to be renegotiated in early 2027. We tell you which incentives apply to your chosen system and include any eligible discounts in your quote.

Why are heat pumps more expensive now than previously advertised?

Prices advertised in the past often included large government rebates and incentives that are no longer available or have been reduced. Rising manufacturing, freight and installation costs have also pushed prices up. We give transparent, up-to-date pricing based on current rebates, product costs and your installation, with no misleading discounts or unrealistic advertised prices.

What is the difference between a cheap and an expensive heat pump?

Mainly quality, energy efficiency, reliability, noise, technology and warranty support. Premium heat pumps often use more advanced technology and better components, and can perform better, particularly in colder weather. We believe reliable after-sales service and manufacturer support matter as much as the purchase price, which is why we recommend proven brands with established Australian support networks.

Which heat pump brands do you recommend?

Rheem, Reclaim, Sanden, Apricus, Midea and Quantum.

What is the difference between Sanden, Reclaim, Rheem and Midea?

All four make energy-efficient hot water systems, but they differ in technology, performance, features, price and warranty support:

  • Sanden: premium Japanese-engineered CO₂ technology, known for excellent energy efficiency, quiet operation and reliability.
  • Reclaim: premium CO₂ heat pumps with excellent efficiency, advanced controls and flexible solar integration.
  • Rheem: a well-established Australian hot water brand with dependable mid-range systems and an extensive service and warranty network.
  • Midea: a more affordable option with good energy efficiency and value for customers on a tighter budget.

We recommend systems based on your household, budget and long-term reliability, and we prioritise brands with established Australian after-sales service and warranty support. Features and warranties vary between models.

Is a CO₂ heat pump better than a conventional refrigerant heat pump?

CO₂ heat pumps are generally the premium option, with excellent energy efficiency, strong cold-weather performance and a more environmentally friendly refrigerant. Sanden and Reclaim use natural CO₂ refrigerant (R744), which has a very low global warming potential compared with many conventional refrigerants. Conventional refrigerant heat pumps can still give excellent performance and value at a lower price. We recommend CO₂ for customers wanting premium performance and long-term efficiency, and quality conventional options for smaller budgets. The best choice depends on your budget, household and the individual model, not just the refrigerant.

How long do heat pumps last?

A quality heat pump typically lasts 10 to 15 years or longer, depending on the brand, water quality, installation and regular maintenance. Premium systems may last longer thanks to better components and technology.

Are heat pumps noisy?

Most modern heat pumps are fairly quiet, with a gentle hum similar to an air conditioner's outdoor unit. Premium systems such as Sanden and Reclaim are designed to be particularly quiet, and noise varies between brands and models. We think carefully about where the heat pump goes to keep noise away from bedrooms, windows and neighbours.

Will a heat pump work properly in winter?

Yes. Modern heat pumps are designed to run efficiently through winter, even when it is cold outside, and premium CO₂ systems such as Sanden and Reclaim perform very well in colder conditions. Some heat pumps take longer to heat water in very cold weather, but a correctly sized and installed system gives reliable hot water all year. We recommend systems suited to Adelaide's climate and your household.

How long does a heat pump take to heat a full tank?

Most take about 3 to 6 hours to heat a full tank from cold, depending on the brand, tank size and outdoor temperature. Premium systems such as Sanden and Reclaim can heat faster, while some budget models take longer, particularly in winter.

Will my family run out of hot water with a heat pump?

A correctly sized heat pump should give enough hot water for your family's normal daily needs. Like any storage system, heavy use or several long showers in a row can run the tank down for a while. We look at your household size, number of bathrooms and daily use to recommend the right tank and system.

What size heat pump tank do I need?

It depends on how many people live in the house, the number of bathrooms and your daily hot water use. As a general guide:

  • 1 to 2 people: 160 to 180 litres
  • 3 to 4 people: 250 to 280 litres
  • 5 or more people: 300 to 315 litres or larger

We also look at shower habits, peak demand and the heat pump's recovery rate, so you have enough hot water without paying for more than you need.

How much electricity will a heat pump use each day?

Most modern heat pumps use about 2 to 5 kWh a day for an average household, depending on hot water use, outdoor temperature and the system. That is generally 60 to 80% less electricity than a conventional electric storage system, and running it in daylight on rooftop solar cuts the cost further.

Can I connect a heat pump to my solar panels?

Yes. Heat pumps work very well with rooftop solar (solar PV). Set the heat pump to run during daylight hours and it uses your excess solar electricity to heat the water, which significantly reduces running costs. We can recommend a suitable heat pump and operating schedule.

Can I run my heat pump during the day using solar power?

Yes. Most modern heat pumps can be programmed to run during daylight hours. We recommend setting it to run during peak solar production, typically between 10am and 3pm. The system can still use grid power when needed so you have enough hot water.

Can a heat pump go where my gas hot water system is now?

Yes, in many cases. Heat pumps need enough space, airflow, suitable drainage and a power supply, which may differ from your gas system. Some are all-in-one units, while others have a separate tank and compressor that can be placed independently. We assess your installation and recommend the best location, reusing existing plumbing wherever practical to keep installation costs down.

What is the difference between an all-in-one and a split heat pump?

An all-in-one (integrated) heat pump has the compressor on top of the tank. A split system, like Sanden, has a separate outdoor unit next to the tank, which is usually quieter and gives more choice on where things go. We can talk you through both.

Do heat pumps need regular servicing?

Yes. Like all hot water systems, heat pumps benefit from periodic servicing to stay efficient and reliable and last longer. A service may include checking safety valves, filters, electrical components, airflow and the tank's sacrificial anode (where fitted). We recommend following the manufacturer's schedule, generally a routine inspection every 1 to 2 years.

What happens if my heat pump breaks down?

First we check whether it is covered by the manufacturer's warranty. If it is, repairs are generally handled through the manufacturer's authorised service network. Outside warranty, we can help arrange diagnosis and repairs where practical. This is why we favour proven brands with established Australian service networks and readily available spare parts.

Can I monitor or control a heat pump with my phone?

Yes, many modern heat pumps have Wi-Fi and a phone app. Depending on the brand and model, you may be able to:

  • adjust operating times and heating schedules
  • monitor energy use
  • select energy-saving or holiday modes
  • see operating status and fault notifications

App features vary between manufacturers, and some may need extra equipment or a subscription.

What is the new technology for hot water heaters?

Heat pump hot water systems are the latest in new technology, providing cheap running costs, and eligible models attract government incentives when you install a new system.

Gas hot water

Replacing, servicing, faults, safety and the future of gas.

Can you replace my existing gas hot water system?

Yes. We replace all types of gas hot water systems, including gas storage, continuous flow and gas-boosted solar. We offer a wide range of trusted brands and can recommend a replacement to suit your household and budget. In most cases we can give you an indicative quote without a site visit: call (08) 8444 7311 or send us an online enquiry with your suburb, existing system details and a few photos.

What is the difference between a gas storage system and continuous flow?

A gas storage system heats and stores hot water in a tank, ready to use. Once the stored hot water runs out, it needs time to reheat. A gas continuous flow system heats water instantly as you need it, giving a continuous supply without a storage tank. Continuous flow systems are generally more compact and can be more energy-efficient, although performance and running costs depend on your household's usage.

Is gas or electric hot water cheaper?

5 Star Gas hot water systems are about the same running cost as a conventional electric off peak system. Sanden Heat pumps will save 82% of your running cost compared to a conventional electric hot water system.

What does the star rating on a gas hot water system mean?

The star rating shows how efficiently the unit uses gas: more stars means less gas for the same hot water. In South Australia, a home connected to mains gas generally needs a gas water heater rated 5 stars or more when the heater is replaced (there are some exceptions, such as certain units inside a roof space or garage). We make sure what we install meets the rules for your home.

Why does my gas hot water system keep switching off?

It may be a problem with the gas supply, water flow, ignition parts, temperature sensors or internal safety controls. Sometimes it is a simple repair; on older systems, parts may be becoming unreliable or reaching the end of their life. We diagnose the problem and recommend the most economical fix, whether that is repairing your system or replacing it with a modern, energy-efficient one.

Why is my gas hot water not getting hot enough?

Possible causes include a faulty thermostat, temperature sensor or tempering valve, restricted water flow, or a problem with the gas supply or burner. It may be a simple repair, or an older system may be losing efficiency or nearing the end of its life. We find the cause and recommend the most cost-effective solution.

My gas hot water pilot light keeps going out. What should I do?

Follow the relighting steps on the unit once. If it goes out again, stop and call us: a pilot that will not stay lit is usually a faulty thermocouple, a dirty pilot or a gas supply problem, and gas parts must be worked on by a licensed gas fitter.

What should I do if I smell gas?

Turn off the gas supply if it is safe to do so, avoid using electrical switches, leave the area and contact your gas emergency service. See our gas hot water system safety page for more.

Do you service and repair older gas hot water systems?

Yes. We service and repair a wide range of older gas systems, including gas storage, continuous flow and gas-boosted solar. We diagnose the fault and tell you whether a repair is practical and economical. On older systems, parts may no longer be available, or repairs may cost more than they are worth. Call (08) 8444 7311 or send us an online enquiry with the brand, model and a short description of the problem.

How long should a gas hot water system last?

Most gas hot water systems last about 10 to 15 years, and some considerably longer, depending on the brand, water quality, usage and maintenance. Gas storage tanks can deteriorate with internal corrosion, while continuous flow systems often last longer with proper maintenance. If your system is approaching 15 years and breaking down often, replacement may be more economical than ongoing repairs.

Do gas hot water systems need servicing?

Yes. Follow the maker's service guide for your model. A service checks the burner, gas controls and flue, tests the relief valve and checks the anode in storage tanks, which helps the unit run safely and last longer.

Can I replace my gas system with a heat pump?

Yes. Switching from gas to an energy-efficient heat pump is a great way to cut your household's energy use and potentially your running costs, particularly if you run it on power from rooftop solar panels. Converting from gas generally needs a suitable spot for the heat pump, plumbing changes, a power supply and safe disconnection of the gas system. We offer heat pumps from affordable options through to premium CO₂ systems such as Sanden and Reclaim, and eligible systems may qualify for government incentives.

Is gas hot water being phased out?

Not currently in South Australia. Gas hot water systems can still be installed, repaired and replaced in existing homes, provided they meet current regulations and installation standards. South Australia has not announced a general phase-out of residential gas (as of November 2026); requirements differ between states, and new homes must meet energy-efficiency standards. Australia is gradually moving towards efficient electric options, particularly heat pumps. We continue to supply and install quality gas systems as well as heat pump alternatives, and can help you compare them.

Continuous flow (instant) gas

Sizes, Rheem and Rinnai, gas pipes and temperature problems.

Is continuous flow cheaper to run?

Yes, in many cases. Gas continuous flow systems can be more economical than gas storage because they only heat water when you need it, instead of keeping a tank of water hot. Actual savings depend on your hot water use, gas tariff and the system's efficiency.

Are instant hot water systems worth it?

Gas instant hot water systems provide endless amounts of hot water never running out, they come in a variety of different sizes to suit small and large households and can be 6 star rated system.

Does continuous flow give unlimited hot water?

Yes. Continuous flow systems heat water on demand, so there is a virtually unlimited supply with no tank to reheat. How much hot water you get at any one time depends on the system's size, the water flow and how many taps or showers are running at once.

How much does a Rheem or Rinnai continuous flow system cost?

It depends on the model, size and installation. We offer competitive supply and installation pricing on Rheem and Rinnai continuous flow systems, including popular 16, 20 and 26 litre models. A straightforward replacement generally costs less than one needing extra gas pipework, electrical work or plumbing changes. Call (08) 8444 7311 or send us an online enquiry with your suburb, existing system details and a few photos; we can usually give you an indicative quote without a site visit.

What size continuous flow system do I need?

It depends on the number of people, bathrooms and how many hot water outlets may run at the same time. As a general guide:

  • 16 litre: smaller households with one bathroom and modest hot water needs
  • 20 litre: a popular choice for average-sized households
  • 26 litre: larger families, several bathrooms or homes where several outlets run at once

The size is how many litres of hot water the unit delivers per minute at a set temperature rise. We also check your gas supply and plumbing before recommending a unit.

Can you install a 26 litre system in place of a smaller unit?

Yes, in most cases. A 26 litre unit gives more hot water capacity for larger families or homes running several showers and taps at once. Larger units may need the existing gas pipework upgraded, so we assess your installation and gas supply and tell you about any changes first.

Will I need to upgrade my gas pipe?

Not necessarily. It depends on the size and type of the new system, the available gas supply and the capacity of your existing pipework. Larger continuous flow systems, particularly 26 litre models, generally need more gas than smaller or older systems. We check your gas installation meets the new system's requirements and Australian gas installation standards, and tell you about any extra work before going ahead.

Can I replace my old Bosch hot water system with a Rheem?

Yes. We regularly replace older Bosch gas hot water systems with modern, energy-efficient Rheem continuous flow models, often in the same location with minor plumbing changes. Any gas supply or electrical upgrades depend on your existing installation. Send us your suburb, Bosch model and a few photos and we will recommend a suitable Rheem and give you an indicative quote.

Can I replace my hot water tank with a continuous flow system?

Usually, yes. We check that your gas meter and pipe size can supply the unit, where the flue and power point will go, and the flow rate you need. It frees up the space the tank used to take.

Do continuous flow systems need electricity?

Yes. Most modern gas continuous flow systems need electricity for their electronic ignition, temperature controls and safety features, usually from a standard 240V power point nearby. Most will not work during a power outage. Some older gas systems run without electricity, so replacing them may mean installing a new weatherproof power point, which we can arrange as part of the job.

Is there an electric continuous flow option?

Yes. Electric instant units are available (for example from Rinnai and Bosch), but the larger ones draw a lot of power and can need a three-phase supply. We check your switchboard and supply before recommending one.

Why does my continuous flow hot water run hot and cold?

Fluctuating temperature is a common problem with gas continuous flow systems. Causes include low water pressure, not enough water flow, blocked filters, faulty temperature sensors or gas supply problems. Sometimes the unit switches on and off because not enough water is flowing through it to keep it running. We diagnose the problem and tell you whether repair or replacement is the more economical option.

Electric storage hot water

Tank sizes, heating times, off-peak, leaks and anodes.

How much does a new electric hot water system cost?

It depends on the brand, tank size and installation. We supply and install a wide range of electric storage systems from trusted makers such as Rheem and Vulcan, including popular 50, 80, 125, 160, 250 and 315 litre models. A straightforward replacement in the same spot generally costs less than one needing extra plumbing, electrical upgrades or relocation. Our price includes taking away your old system. Call (08) 8444 7311 or send us an online enquiry with your suburb, existing system details and a few photos for an indicative quote, usually without a site visit.

Can you replace my electric hot water tank with the same size?

Yes. We replace electric storage systems with the same or an equivalent tank size, including 50, 80, 125, 160, 250 and 315 litre models. In most cases the new system goes in the same spot, reusing the existing plumbing and electrical connections where suitable to keep costs down. South Australian rules can limit which type of heater goes into some homes (for example homes connected to mains gas), so we check what applies to yours before we quote. More on the SA water heater requirements.

What is the cheapest option for hot water?

Small conventional electric hot water systems come in 25 and 50 litre capacity, making them cheap to install. However they can be quite expensive to run.

Why has my electric hot water stopped working?

Common causes are a faulty heating element or thermostat, an electrical supply problem or a tripped circuit breaker. Check the hot water circuit in your switchboard first; if it keeps tripping, leave it off and call us. It may be a simple repair, or an older system may be wearing out. We find the cause and recommend the most cost-effective fix.

Why am I running out of hot water?

It could be a faulty element, thermostat or tempering valve, or not enough heating time. Your tank may also be too small for your household now, particularly if the family has grown or you use more hot water. We find the cause and recommend the best fix, whether that is a repair, a bigger tank or a more energy-efficient heat pump.

How long does an electric hot water tank take to heat?

It depends on the tank size, the element and the incoming water temperature. As a guide, with a standard 3.6 kW element:

  • 80 litres: 1 to 2 hours
  • 125 litres: 2 to 3 hours
  • 160 litres: 2.5 to 3.5 hours
  • 250 litres: 4 to 5 hours
  • 315 litres: 5 to 6 hours

Systems on off-peak power only heat during set hours, which affects when hot water is available.

What size electric hot water tank do I need?

It depends on the number of people, bathrooms and your daily hot water use. As a general guide:

  • 1 to 2 people: 80 to 125 litres
  • 2 to 3 people: 125 to 160 litres
  • 3 to 4 people: 160 to 250 litres
  • 4 to 5 people: 250 to 315 litres
  • 5 or more people: 315 litres or larger

Your needs may differ with shower habits, how many outlets run at once and whether the system is on continuous or off-peak power.

Is my hot water system on off-peak electricity?

Many electric storage systems in South Australia run on an off-peak or controlled load tariff, heating the water at set times when power may be cheaper. Not all do: some run on continuous power, and others are on timers or rooftop solar. Check your electricity bill for a controlled load or off-peak tariff, or ask your electricity retailer.

When does off-peak hot water heat up in South Australia?

On SA Power Networks' controlled load tariff the cheaper times are overnight (11:30pm to 6:30am) and the middle of the day "solar sponge" window (9:30am to 4:30pm). Your retailer's times can differ, so check your bill or ask them.

Do hot water systems use a lot of electricity?

The most expensive way to heat hot water is with a conventional electric hot water system on continuous tariff. Moving the tank to an off-peak tariff, or switching to a heat pump, cuts that cost a lot.

Can I replace my electric storage system with a heat pump?

Yes. A heat pump is an excellent way to cut your electricity use and running costs, using up to 60 to 75% less electricity than a conventional electric storage system, depending on the model and conditions. In many cases it can go where your electric tank is now, subject to space, airflow, drainage and electrical requirements. We offer heat pumps from Rheem, Midea, Sanden and Reclaim to suit different budgets, eligible systems may qualify for government incentives, and running it in daylight on rooftop solar saves even more.

Why is my electric hot water system leaking from the valve?

A small drip from the pressure relief valve while the water heats is normal: water expands as it heats and the valve releases the extra pressure to protect the tank. Constant dripping or a lot of water may mean a faulty relief valve, high water pressure or another problem. We inspect the system, find the cause and recommend the most cost-effective repair, and if the system is older we can tell you whether replacing it is the better long-term option.

How often does a hot water system anode need replacing?

Most electric storage systems with a vitreous enamel-lined (glass-lined) steel tank have a sacrificial anode that protects the tank from corrosion. As a general guide we recommend inspecting it about every 3 to 5 years, and replacing it depending on its condition, your water quality and the manufacturer's advice. Hard or aggressive water can mean more frequent checks. Stainless steel tanks generally do not need a sacrificial anode.

How long should an electric storage hot water system last?

Most last about 10 to 15 years, and some considerably longer, depending on the brand, water quality, usage and maintenance. Glass-lined steel tanks rely on the anode to prevent corrosion, so regular anode checks help them last. Stainless steel tanks generally do not need one and may last longer in suitable water. If your system is approaching 15 years, showing corrosion, leaking or needing frequent repairs, replacing it may be more economical.

Solar hot water

Repairs, pumps, panels, boosters and replacements.

Do you repair solar hot water systems?

Yes. We service, diagnose and repair a wide range of solar hot water systems, including roof-mounted, split-system, gas-boosted and electric-boosted systems. Common repairs include faulty circulation pumps, solar controllers, temperature sensors, leaking pipework, valves and boosting problems. We service many leading brands, including Rheem, Rinnai, Edwards, Solahart, Apricus and Chromagen, subject to parts availability. For systems approaching 15 to 20 years old, parts can be hard to get or repairs may no longer be economical, and we will tell you honestly whether to repair or upgrade.

Why is my solar hot water system not heating properly?

Possible causes include a faulty circulation pump, solar controller or temperature sensor, airlocks, blocked or leaking collectors, or a problem with the gas or electric booster. Less solar heating in cloudy weather and winter is normal, but the booster should make up the difference. It may be a simple repair, while older systems may have worn parts that are no longer available.

Can you replace a faulty solar circulation pump?

Yes. We diagnose and replace faulty circulation pumps on a wide range of split-system solar hot water systems. A failed pump stops heated water moving between the collectors and the tank, so you get poor heating or not enough hot water. We check the pump, controller and sensors to find the cause. For older systems, replacement pumps may no longer be available or worth fitting, and we can recommend alternatives.

What happens if the solar controller fails?

A faulty controller can stop the circulation pump working properly, reducing or stopping solar heating. The gas or electric booster may still give you hot water if it is working correctly.

Why is my solar gas booster not working?

A gas booster can stop working because of ignition faults, not enough gas supply, faulty temperature sensors, restricted water flow or electrical problems.

Can you repair a leaking solar hot water panel?

In some cases. Leaks can come from worn pipe connections, seals, collector manifolds or corrosion inside the collectors. External pipework and connection leaks can often be repaired; leaks inside the collector itself may not be economical to fix, particularly on older systems where replacement panels are no longer available. For systems approaching 15 to 20 years, we may recommend replacing the whole system.

Can you repair evacuated tube solar hot water systems?

Yes. We diagnose, service and repair evacuated tube systems, including Apricus, Chromagen and other established brands. Common problems are faulty circulation pumps, controllers and sensors, leaking manifolds, damaged tubes and the plumbing around them. Many faults can be repaired, depending on the system's age and condition and whether parts are available.

Are parts available for older solar hot water systems?

Yes, in many cases. Circulation pumps, controllers, temperature sensors and valves may still be available. Parts for discontinued models, particularly collectors and manifolds, can be difficult or impossible to get.

Can I keep my solar panels and just replace the tank?

In some cases, yes, if your collectors are in good condition and compatible with the new tank. We also need to consider the system's age and the condition of the pumps, controllers and other parts.

How much does it cost to replace an old solar hot water system?

It depends on the type of system, brand, tank size and installation, including whether it is gas or electric boosted and how complex the job is. Call (08) 8444 7311 or send us an online enquiry with a few photos for an indicative price.

Can you replace my solar hot water system with a heat pump?

Yes. Heat pumps are very energy-efficient, cheaper to run and work particularly well with rooftop solar power. We can arrange disconnection and removal of your existing solar system, including the roof collectors where needed. Eligible heat pumps may qualify for government incentives.

Can you remove old solar hot water panels from the roof?

Yes. We arrange safe removal and disposal of old solar collectors, both flat panels and evacuated tubes, disconnect the plumbing and seal the roof penetrations where needed. Panel removal can be part of a full replacement or quoted separately, depending on roof access and the installation.

Can you install a new gas-boosted solar hot water system?

Yes. We supply and install complete gas-boosted solar systems from trusted makers such as Rheem. The sun heats the water and the gas booster tops it up when needed, so you have hot water all year. We can replace your existing system or install a new one, including collectors, tank, gas booster and plumbing, subject to site requirements.

Are solar hot water systems still worth installing?

Yes, they can still be a worthwhile investment, particularly for households with high hot water use and suitable roof space. Heat pumps are becoming a popular alternative because they are very efficient, often cheaper to install and can use your rooftop solar power.

Is a heat pump better than solar hot water?

In many cases, yes. Modern heat pumps are very energy-efficient, generally easier to install and can be more cost-effective than traditional solar hot water systems. They work day and night, regardless of sunshine, and pair well with rooftop solar panels to cut running costs.

I have solar panels. Do I still need solar hot water?

Not always. With rooftop solar panels, many homes are better off with a heat pump or an electric tank set to heat in the middle of the day, using power from the panels. We look at your roof, your panels and how you use hot water before recommending one.

What is an evacuated tube solar hot water system?

Instead of flat panels, the collector is a row of glass tubes that hold heat well, even in cooler weather. Apricus evacuated tube systems are one we supply, with a 10 year tank warranty.

Brands

Which brands we supply and service.

Which brands do you supply and repair?

Most makes and models, provided the parts and technical data are available, including AquaMAX, Apricus, Bosch, Dux, Midea, Reclaim Energy, Rheem, Rinnai, Sanden, Stiebel Eltron and Vulcan. We are an authorised Bosch service agent in Adelaide. See our AquaMAX, Apricus, Bosch, Dux, Midea, Reclaim Energy, Rheem, Rinnai, Sanden and Vulcan pages.

What is the best water heater in Australia?

Our top water heaters in Australia:

  • Sanden Premium energy efficient Hot Water Systems, Australian made Stainless steel tanks with 15 year warranty
  • Apricus Evacuated tube solar hot water systems, 10 year tank warranty
  • Rheem Metro Gas Continuous flow hot water system, 10 Year Exchanger warranty
  • Bosch Hydro power gas hot water systems, 10 year heat exchanger warranty
  • Vulcan electric hot water systems, 10 year tank warranty
Which is the No 1 water heater brand?

Sanden Heat pump hot water are the number 1 hot water system in Australia providing the longest warranties and most efficient systems.

Is Rinnai hot water system a good brand?

Rinnai hot water provide a good quality product however are more expensive than the equivalent Rheem hot water system.

Is Rheem hot water system better than Dux hot water system?

Rheem hot water have much better quality products and more efficient than Dux.

Rebates and SA rules

Incentives, water temperature and what the law requires.

What rebates are there for hot water in South Australia?

The main one is the federal small-scale technology certificate (STC) scheme for eligible solar and heat pump water heaters, which runs until 2030. South Australia also has the Retailer Energy Productivity Scheme (REPS), but its 2026 allocation has been used up and is due to be renegotiated in early 2027. There are also discounted green loans through some lenders. We tell you which incentives apply to your chosen system and include any eligible discounts in your quote.

What are STCs?

Small-scale technology certificates are created when an eligible solar or heat pump water heater is installed. Most people assign them to the installer or an agent in exchange for a discount on the price. The number of certificates depends on the model and where you live, and it reduces each year until the scheme ends in 2030. More from the Clean Energy Regulator.

What is the SA Retailer Energy Productivity Scheme (REPS)?

It is a South Australian scheme that requires larger energy retailers to help households save energy, and replacing or upgrading a water heater is one of the eligible activities. The incentive is offered through third-party providers on behalf of the retailers. The 2026 allocation has been used up and is due to be renegotiated in early 2027. More on the SA Government REPS page.

Are there loans for an energy efficient hot water system?

Yes. The federal Household Energy Upgrades Fund offers discounted loans through participating lenders, and heat pump hot water is one of the eligible upgrades. Check the terms with the lender.

What type of water heater can I install in South Australia?

South Australia has rules on which water heaters can go into homes. New homes, and existing homes connected to mains gas, generally need a low emission type: 5 star gas, solar, a heat pump or another approved type. Existing homes without mains gas can also choose a standard electric unit up to a set size. There are exceptions, so we check what applies to your home. Details: SA water heater requirements.

How hot should my hot water be?

Water in a storage tank should be kept at 60°C or more to stop bacteria growing. At bathroom taps, showers and baths, hot water from a new or replaced system must be no hotter than 50°C to prevent scalds (45°C in places like aged care, childcare and schools). A tempering valve does that mixing for you.

What is a tempering valve and does it need servicing?

A tempering valve mixes hot and cold water so the water at your bathroom outlets stays at a safe temperature. It should be tested every 12 months and repaired or replaced if it is not working properly. Lukewarm or too-hot showers can be a sign it needs attention.

Do I need a licensed plumber to install a hot water system?

Yes. In South Australia, water heaters must be installed by a licensed plumber, and gas connections by a licensed gas fitter. Doing it yourself is against the law and can void the warranty.

Will I get a certificate of compliance?

Yes. In South Australia an electronic certificate of compliance is issued for plumbing work like a water heater installation, and for gas fitting work. It is your record that the job meets the rules, so keep it with your house papers.

Warranty

Product warranties, workmanship and warranty repairs.

What warranty comes with a new hot water system?

It depends on the system. Each brand and model has its own manufacturer's warranty, and we tell you what applies when we quote.

How long is your workmanship warranty?

All installations are carried out by appropriately licensed tradespeople in accordance with applicable Australian Standards and plumbing regulations. Our installation workmanship is covered by applicable statutory warranties and consumer guarantees under South Australian and Australian Consumer Law. The hot water system itself is also covered by the manufacturer's applicable product warranty.

Can you arrange manufacturer warranty repairs, and does that cover labour as well as parts?

We can assist with manufacturer warranty enquiries and help arrange repairs through the manufacturer's authorised service network. Warranty coverage varies between brands and models. Most manufacturers provide separate warranty periods for parts and labour, and some may charge for labour once the initial coverage period expires. We recommend checking your manufacturer's warranty conditions to confirm what is covered. Your rights under Australian Consumer Law may also apply.

Installation

What to expect on the day your new system goes in.

Do I need to be home during the hot water system installation?

We prefer the property owner or an authorised representative to be present during installation to answer any questions, discuss unforeseen issues and approve any necessary changes. Being available also allows us to explain the operation of your new hot water system and finalise payment before commissioning and handover. If you cannot be home, alternative arrangements may be possible, provided access, communication and payment arrangements are agreed upon beforehand.

How long will I be without hot water during installation?

Most straightforward hot water system replacements take approximately 2 to 4 hours, although more complex installations may take longer. Once installed, gas continuous flow systems generally provide hot water immediately, while electric storage and heat pump systems require additional time to heat the water. We aim to minimise disruption and restore your hot water supply as quickly as practical.

Do you clean up and remove all rubbish after installation?

Yes. We ensure the work area is left clean and tidy following installation. All old hot water system components, packaging and installation rubbish are removed from the property and disposed of appropriately. Our aim is to leave your property neat and tidy, with your new hot water system ready for use. Removing and disposing of your old system is free of charge.

What happens if my existing plumbing doesn't meet current standards?

If we identify plumbing that doesn't comply with current regulations, we'll explain the issue and advise what modifications are required to ensure your new hot water system is installed safely and compliantly. Any additional work not included in the original quotation will be discussed and approved by you before proceeding. Our priority is to ensure your installation meets all applicable Australian Standards and plumbing regulations, with no unexpected charges without your approval.

Can there be extra charges once the job starts, or is the quote fixed?

Our quotations are fixed based on the agreed scope of work and information available at the time of quoting. Occasionally, unforeseen issues such as non-compliant plumbing, concealed damage or additional installation requirements may arise. If additional work is necessary, we will explain the situation, provide the additional cost and obtain your approval before proceeding. No additional work will be carried out or charged without your prior approval.

Company and booking

About us, insurance, deposits, payments and bookings.

How long has Adelaide Hot Water been operating?

Adelaide Hot Water has been operating since 1985, serving Adelaide and South Australian customers with professional hot water repairs, servicing and installations. With 40+ years of industry experience, we've built our reputation on reliable service, quality workmanship, trusted products and expert advice. Our experience means customers can rely on us for practical, cost-effective hot water solutions backed by dependable after-sales support.

Does Adelaide Hot Water have public liability insurance?

Yes. Adelaide Hot Water carries $20 million in public liability insurance, providing our customers with peace of mind. We engage appropriately licensed and insured tradespeople, ensuring work is carried out professionally, safely and in accordance with relevant Australian Standards and regulations.

Do you require a deposit, and when is the balance due?

Yes. A deposit is required to confirm acceptance of your quotation, secure your installation booking and arrange the necessary materials. The remaining balance is payable prior to completion of works and final commissioning and handover. All payments must be received and cleared before the new hot water system is commissioned and handed over.

Do you accept Visa, Mastercard and bank transfers?

Yes. We accept payments by Visa, Mastercard and direct bank transfer (EFT). Payments can be made securely by credit card over the phone or by bank transfer using the details provided on your quotation or invoice. All payments must be received and cleared prior to final commissioning and handover.

Can I change or cancel my installation booking?

Yes. We understand that circumstances can change, and we'll do our best to accommodate requests to reschedule or cancel bookings. We ask that you provide at least 48 hours' notice wherever possible. Late cancellations or changes may incur additional charges, particularly where materials have been specially ordered or tradespeople have already been scheduled. Any applicable charges will be assessed in accordance with our terms and conditions and Australian Consumer Law.

Can you deal with tenants and property managers, and invoice an insurer or agent?

Yes. We regularly work with landlords, tenants, property managers and insurance companies. We can coordinate access directly with tenants, arrange repairs or replacements, and provide quotations, invoices and reports to property managers or insurers. We simply require the appropriate authorisation and confirmation of payment arrangements before proceeding with any work.

See our property managers page.

Service areas and hours

Where and when we work across Adelaide.

What are your hours?

Monday to Friday. We do not offer after-hours or weekend service. Call before 9am on a weekday and we can most likely get to you the same day.

What areas do you cover?

All of metropolitan Adelaide, from Gawler to Victor Harbor and up to Mount Barker in the Adelaide Hills. See areas covered, or call (08) 8444 7311 and we will confirm your suburb.

Do you cover the Adelaide Hills and Mount Barker?

Yes. We work across the Adelaide Hills including Mount Barker, and out to Murray Bridge.

Do you cover the northern suburbs and Gawler?
Do you cover the southern suburbs and Victor Harbor?

Got a hot water job?

Ring (08) 8444 7311, or send the details and a photo of the unit.

Rheem Stellar 330 gas storage tank in a side path, trolley and tools nearby
Rheem Stellar 330, Croydon
Photos or PDFs (optional, up to 6)

    A photo of the unit and its sticker plate helps us bring the right parts.

    Call nowGet a quote